|
ANODISED ALUMINIUM LIGHTWEIGHT RAM PIPE
Manufactured in Birmingham in the UK by longstanding tuning company Hipwell Arden.
Handcrafted in exactly the same way by the same manufacturer as they have been doing for over 50 years.
Do a google search for Arden Continental Car Accessory Company or Hipwell Arden for more info. If they're not made by Arden then they're a replica!
Beautifully made and shaped for air flow - they worked well in the 60s/70s and just as well today
Fits direct into place on classic SU carbs. To fit remove the air filter and fit these instead - you may be able to cut down and reuse the fastenings holding the old filter or filter box on. A new gasket is supplied. Ideally you should re-tune the carb(s) - and further ideally should be combined with a freeflow manifold and exhaust - the power liberated will be noticeable.
Priced & sold singularly - if you have twin carbs you will need two if you are fitting fitting these pipes for the first time rather than replacing a lost/damaged one.
Note that these are designed to be used in place of (not as well as) a bolt on air filter...and have a gauze to prevent intake of flies, grit etc. Approximate length 90mm.
Correct for SU carbs - will not fit Stromberg, Weber or any other carb type.
|
